In this blog entry, the professional Chicago garage door repair service experts here at Garage Door Repair Chicago will detail the best ways to know if your garage door opener transmitter batteries are dead.
What are the main signs of dead garage door transmitter batteries?
- Improper Operation– If your garage door opener remote buttons don’t work, or only sometimes respond to commands, it’s likely due to dying or weak batteries.
- Stuck Garage Door– If your garage wont open or close after you press the button on your garage door opener. It could be a signal of dead garage transmitter batteries which prevent the remote from being able to signal your opener to operate.
- If Your Wall Mount Control Works– Before contacting a professional repair service, try to raise or lower your garage using the wall-mounted garage door opener panel. If it works when the wall controls are activated, replace your transmitter batteries and test if the garage opener works then.
How can I replace garage door transmitter batteries?
- Remove the rear slot of the garage door remote where the battery is housed by sliding it off. Some remotes use screws to keep the slot closed – use a small screwdriver, like those for glasses, to remove screws and remove the latch.
- When the battery slot is opened, remove the dead battery and replace it with the fresh one. Be careful to properly align positive and negative signal ends in the battery slot, and to make sure that the battery is firmly in place.
If your garage door still won’t open after you replace your garage door transmitter batteries, check that the garage door’s lock button isn’t accidentally engaged on your garage door opener wall mount control.
